2019 – 2021 VS30 Sprinter Van Sprintek Driver & Passenger Side
Electric Power Running Boards w/Amp Research Steps – Free Shipping
Please note that this item only ships free to the Contiguous United States. It does not include Canada, Hawaii, Alaska, or the other USA territories.
WORKS WITH REAR AC AND SINGLE FACTORY ESPAR
IF ADDING ESPAR AFTER ELECTRIC STEPS INSTALLED, ESPAR EXHAUST WILL NEED TO BE ROUTED AROUND AMP STEPS MOUNTING BRACKETS
SPRINTERS WITH THE 4 CYLINDER GAS ENGINE REQUIRE A DIFFERENT FITMENT KIT ON DRIVER SIDE. SEE DROP DOWN MENU FOR OPTIONS
These are Specialized Sprintek Installation Kits, for the VS30 Sprinter Van to use the AMP Research Power Step Steps, The kit is warrantied and fully covered by the Sprinter Store.
This product will take approximately up to 7 days to process as these running boards are made to order.
THEY ARE NOT AVAILABLE FROM AMP RESEARCH – THEY DO NOT SELL THESE. WE DO. PLEASE CONTACT US WITH QUESTIONS – AS AMP RESEARCH HAS NO BOARDS FOR THE 2019-2021 VS30 SPRINTERS.
Mercedes Benz | Sprinter | 2019 -2021 VS30 |144″, 170″ & 170″ Extended Wheelbase
Getting into your truck shouldn’t feel like climbing Mount Everest… That’s why AMP Research invented POWERSTEP™, the automatic, electric-powered running board that instantly extends when you open your door and then hides safely out of sight when the doors close for improved ground clearance, aerodynamics, and appearance.
- Automatic power-deploying running boards
- Low-profile integrated LED light system – Standard
- High-strength, die-cast aluminum-alloy components with an anodized and Teflon®-Coated, military-spec finish to resist corrosion
- Precision stainless-steel pivot pins for rock-solid stability. Maintenance-free, self-lubricating bushings for all-weather performance
- Extruded aluminum steps with full-length internal ribs for rock-solid stiffness, rigidity and support with a high-texture. Powder-Coat finish for maximum grip and durability
- 600 lbs load capacity (each side)
- Weatherproof, OEM-Quality electric motors, drive system and wiring harness. Pressure-sensitive, pinch-proof safety technology
- Limited 5 year or 60,000-mile warranty
Note: The installation kit is not made by AMP running boards, we did our own research and specially manufactured the 2019 and 2020 installation kit. This product is still covered by the same warranty as other AMP running boards.
Q: My running board is not retracting all the way up. It goes about halfway, then just stops. Is it affected by temperature?
A: The temp can be a contributing factor. It is probably an alignment issue. The temp makes it worse because the cold makes all the tolerances shrink up.
You will need a helper or you can be creative with a floor jack or blocks of wood or something. When the running board will not pull up in the front properly I would say the first things to look for are loose fasteners or alignment. Pleases take a look at the following. It walks you through an alignment procedure that addresses the issue you are describing. In addition, while working on the running board the technician should check every fastener to ensure everything is properly secured. Making sure everything is tight is critical.
1) Open the door to put the running board in the down position
2) Disconnect the wire harness from the motor. Remove the motor.
3) Disconnect the idler linkage (front) from the running board. Remove the two 3/16” allen head bolts that go up from the bottom into the running board extrusion. Disconnect the front linkage (idler linkage) from the running board so that the linkage is no longer connected to the running board. You will probably have to bang it loose.
Loosen the bolts that hold the front linkage (idler linkage) to the body and support bracket. Make the bolts finger tight. Leave the linkage on the body, do not remove.
4) Loosen the rear linkage (motor linkage) from the body. Make the bolts going into the rocker panel and support bracket finger tight.
5) Have an assistant go to the front of the running board that was connected to the idler linkage and pull the running board up. Do not retract the running board. Pull up away from the ground. You will be slightly twisting the motor linkage in its holes. Hold the running board in this position and tighten the bolts that hold the motor linkage (rear) to the body. Then tighten the bolt that holds the support bracket to the motor linkage.
6) Manually retract the running board and hold it in the retracted position like when the door is closed.
7) Re-connect the idler linkage (front) to the running board while the running board is in the retracted position. Tighten the 3/16” allen head bolts that hold the running board to the linkage first and the bolts that hold the linkage to the body last. Alternate tightening the 3/16” bolts so that the linkage and the running board pull up together and tighten evenly.
8) Cycle the step by hand and make sure there is no resistance/binding.
9) Replace the motor and test
Its handsome design, all-weather performance, and legendary reliability set the industry standard. Its industry-leading 5 Year/60,000 Mile warranty. Invented, engineered and built in America, AMP Research PowerStep™ has been tested and proven in long-term, real-world, driving conditions performing flawlessly in snow, ice, dust, mud, and dirt. The lightweight, yet rock-solid running board and rugged die-cast linkage components are crafted in the USA of aircraft-quality aluminum, black-anodized and Teflon(R) coated for maximum corrosion protection. Precision, stainless-steel hinge points and bearings ensure trouble-free action. And the heavy-duty electric motor is designed and tested to provide reliable, maintenance-free operation for decades.
This is the first of its kind. The Sprinter Automatic Running Board Electric Step is the ultimate step for any heavy-duty conversion.
The Amp Research PowerStep is covered by a limited 5 Year warranty.
The distance from the interior floorboard to the top of the deployed step is approx. 10 inches.
Each kit includes one PowerStep for the passenger side and one for the driver side that covers the front and sliding door. This 79-inch step includes OEM style illumination, assembly with wire harness, electronic controller, mounting hardware and detailed installation guide.
If you are searching for a van that is versatile and gratifies anyone’s taste, one that will carry passengers or cargo, the answer is the Mercedes Benz Sprinter and the Automatic Running Board Electric Step is the answer to your prayers. Just the name Mercedes rings a bell in most automotive owner’s minds. Put that together with a vehicle that can carry over ten people or haul your cargo and the Mercedes Benz Sprinter comes out on top. It’s a sure winner, manufactured in a sleek style so characteristic of the Mercedes brand. For example, the transport area is great for companies and the Mercedes Benz Sprinter Running Boards are second to none! The Sprinter is perfect for as an airport shuttle, luxury RV, commercial carrier, or cab chassis. The Mercedes Benz Sprinter is what large vehicles are all about; comfort, opulence, quality, and endurance.
Mercedes Benz Sprinter Design
In many ways, the structure of the Mercedes Benz Sprinter Automatic Running Boards adequately meets everyday requirements and goes beyond your assumptions in spite of a hefty base price tag. Everything a smaller Mercedes vehicle incorporates is integrated into the Mercedes Benz Sprinter. First of all, you have the three-pointed star facing the conventional grille and shortened hood. At the back of the legendary face is the center of the Mercedes Benz Sprinter power, a 3.0 liter V6 Bluetec diesel, supplying up to 188 horsepower with 325 lb-ft of rotating force while meeting the austere emission regulations established by the California Air Resources Board and the EPA. Whether deciding upon a regular roof with a brief wheelbase or the high roof resting on the long or short wheelbase, you will take pleasure in the ample space and outstanding capabilities.
Most of the technology in the Mercedes Benz Sprinter is committed to safety; nonetheless, an Audio 20 radio is on hand, a dual tuner, CD player with MP3 ability, CD changer and Bluetooth with a telephone keyboard. In order to maintain equilibrium, Mercedes has an ADESP, Adaptive Electronic Stability Program that operates with an ABS. Moreover, the Mercedes Benz Sprinter has skid ascendancy, electronic brake-force allocation, ESP Trailer Stability Assist and Brake Assist.
Beneath the hood, the 3.0 liter V6 is secured with up to the minute cognition. Fuel is distributed by way of high-tech universal rail technology and compressed through an inter-cooled turbocharger. After being lit, exhaust gases are cleansed with Bluetec; the Mercedes Benz privately owned SCR or Selective Catalytic Reduction utilizing AdBlue diesel exhaust liquid.
Possibly, the most noteworthy technology dividing the Mercedes Benz Sprinter Automatic Running Boards from other domestic vehicles is the idea in the back of the design. The uniqueness of merging everyday driving necessities with practical amenities is a true stroke of brilliance in the automotive world! The best in technological advancement is implemented while drivers and passengers carry on with everyday manual vehicle activity.