Sprinter High Capacity Aluminum Oil Pan for the MB 722.xxx transmission design.
This product is compatible with all Sprinter Vans besides the 4 cylinder and the Sprinter 4×4.
INCLUDES GASKET AND OE A/T FILTER
- Dimensions: 15 x 12 x 5 – 9 lbs.
- Extra 2 1/2 liters of capacity
- Includes: Aluminum high capacity pan, gasket & MB OE filter
- Sand cast aluminum pan with cooling fins
- Deep center section to clear cross member in certain models
- Filter supports cast into pan to hold original filter in normal location
- Reported fluid temperature drops of around 10 – 35 Degrees
- Machined gasket surface 3/8″ thick and neoprene gasket for no leak seal
- Side drain for better clearance
- High quality made in the USA, gasket surface is 3/8″ thick to remove all warping, 3/16″ thick side walls
- install hardware provided
- Some vehicles have a shield that attaches to the retaining clip at the front, passenger side corner of the stock pan. If you have this, you will need to fabricate a connector from the Pan bolt to hold the shield.
Not confirmed to fit 2019 models as of yet. We are currently researching what parts will fit the 2019 models of Sprinter vans.
Proposition 65 information available here – https://www.sprinterstore.com/proposition-65-california-cancer-warnings/.