2007-2019 Sprinter Sliding Door T-vent Window 144 and 170 Wheelbase- FW625R
This product is compatible with all Sprinter Vans made after 2007 with either a 144″ wheelbase or a 170″ wheelbase. This includes the 2019 Sprinter Van.
NOTE: Please allow 10-14 days for shipping
What is the official part number for this thing? I want to make sure that I’m buying the right one for my van.
The official number we have for this product is FW625R.
Do you know what Sprinter models this thing fits?
It will fit all Sprinter models that are 2007 and newer.
Do these things have frames? I keep seeing that they are “all-glass”.
Actually, the manufacturer calls them “all-glass” frames. They may look like there is no frame but we were told that these windows do include frames. They are just expertly hidden to add to the look of the window.
Am I going to have to do a layout?
No. You will get a window that will be fairly easy to install. You will have to make a cut but you do not have to drill. You can follow the OEM stampings for your cut line.
How easy is it to install this thing?
Installation is simple, just line it up to cut, starting on the upper inner dimple and follow along with the OEM stamping.
Just how dark is this glass? I need to know to check if it’s legal in my state to have these windows on my van.
The official number says that the tint is 28%.
What is the official color of the glass? I know that “transparent” or “smokey black” is not always what they sound like.
The official color of this glass is dark gray glass.
Which wheel frames does this thing fit?
The t-vent sliding door window will fit 170″ and 144″ wheelbase vans.
Where do you put this window? I don’t want my installers to be putting this thing on the wrong side.
The location that this window was designed to fit is the passenger sliding door.
What type of window is this thing again?
It is a t-vent window.
Any idea what the shipping weight of this product is? I’m by myself and I don’t want to throw out my back trying to lift this thing.
The official weight of this window is 35 lbs or 15.88 kgs.
I’ve heard that this is a product that should have a primer. Why would I want to put primer on my window?
The primer helps your edge from rusting. It is placed on the edge to give you a layer of protection.
I assume that I’m going to need tools, right? Do you know which ones I will need?
You will likely need a drill in order to start the hole. You will have to, then, continue the cut with a metal bladed jigsaw. The jigsaw can be electric or pneumatic. If you wish, you could use a center-cut shear instead. You will also need a file so that you can get rid of any burs and the primer we talked about earlier. You will need a screwdriver to attach your clamp ring. You have to be extremely careful, however, to make sure that you do not use too much power if you are using a power tool if you choose to try to do this repair DIY.
Does this window fit high roof or low roof Sprinter Vans?
It actually will fit both of those types of Sprinter vans.