Ram Promaster 1500/2500/3500 Rear Sway Bar


Due to fluctuations in the market please give us a call for current pricing 503-427-2270

About Hellwig:

Since its founding in 1946, Hellwig Suspension Products has specialized in American-made, precision-engineered products for a wide array of vehicles, both classic and new. This fourth-generation family-run California company began by selling helper springs to customers door to door, and in the 76 years since its inception, Hellwig Products continues to help enthusiasts with their suspension needs. Hellwig is continually improving its products to provide the best performance suspension parts in the industry. one of the special products is Ram Promaster 1500/2500/3500 Rear Sway Bar Hellwig is ISO 9001:2015 certified for quality management systems and ISO 14001:2015 certified for environmental management systems.

RAM ProMaster 1500, 2500, and 3500 Rear Sway Bar
Rear Sway Bar for Stock Height Vehicles by Hellwig®.
Quantity: 1 per Pack.
Designed to provide optimum performance on lowered vehicles as well as lifted trucks with a higher center of gravity
Reduces side-to-side body roll around turns, enhances tire grip and optimizes stability at higher speeds
Crafted from chrome-moly steel that matches the strength of traditional steel with lighter weight
Solid steel construction offers the highest rigidity on the market, with an average tensile bending resistance of 170,000 psi
Powder coat finish resists corrosion, chips, and scratches better than paint
Each application effectively reduces side-to-side body roll around turns, enhances tire grip, and optimizes vehicle stability at higher speeds. Balanced for neutral steering and precise turn-in response, all sway bars come with durable polyurethane bushings that resist unwanted squish or decay. Crafted from solid Chromoly steel for the highest rigidity, both ends feature mounting holes at sway bar ends that can be used to vary stiffness level. Includes mounting brackets, end links, and related hardware.
Finish: Heat Treated Chrome-oly
Sway Bar Profile: Solid
Sway Bar Diameter: 1.375"
Reuses factory end links
Includes durable polyurethane bushings that resist deterioration, cracking, and drying out under extreme use
Also includes mounting brackets, end links (if applicable), and related hardware
Flattened ends provide a superior mounting surface
Specifically sized and tuned for the layout of your make and model's suspension
Limited lifetime manufacturer warranty
Manufactured in the United States
Easy installation with no drilling required
Hellwig Sway Bars for lowered vehicles and lifted trucks provide beefed up the strength to keep you riding stable at any speed on the pavement, and they provide adjustment of roll stiffness with three mounting holes on each end. Set the bar to maintain normal stiffness, or use different mounting points to increase rigidity and keep body roll at an extreme minimum. Chrome-molybdenum steel (also known as “chrome-moly”) is used in the construction of Hellwig sway bars. The chrome-moly blend of iron, chromium, and molybdenum produces a close-grained metal than traditional steel. Because these bars are crafted from solid steel, they possess greater strength from an equal amount of material. In fact, each bar leaves the factory with a tensile strength rating of 170,000 psi – much higher than products from competitors.
With Hellwig sway bars created for optimum performance at non-stock ride heights, you'll benefit from designs that are specifically sized for your make and model. They will not interfere with your suspension's ride quality under normal driving conditions and are a perfect way to complement performance enhancements such as plus-sized tires and wheels. An outer finish of the powder coat is applied for show car looks, durability, and corrosion protection. And to ensure sway bars keep your suspension properly positioned, Hellwig uses polyurethane bushings because they are more resilient and resist compression better than rubber. Grip-robbing body lean and weight transfer caused by squishy bushings are eliminated.
Warranty Information
Hellwig Products Company, Inc., give you, the original retail consumer, Hellwig warranty that each new Hellwig product of Hellwig manufacture shall be free from defects of material and workmanship as set forth in this limited warranty. Length of coverage: Except as provided below Hellwig offers the following warranty duration by-products. (A) Hellwig steel spring and sway bar products and their components are warranted for the normal life of the vehicle these products are originally installed upon. (B) Hellwig Air Suspension systems, air sleeves, air bellows and air compressor systems are warranted for two years from the original purchase date. This extends only to the product installed on the original vehicle.
Hellwig's® history began in 1941 with a patent Rudy Hellwig had been granted for an overload spring design he had developed and perfected. Hammering out the springs by hand in a rented blacksmith shop in Kansas, Rudy moved to California after the end of World War II steel rationing made materials more widely available. Founding Hellwig Products in 1946 out of Glendale, California, Rudy began manufacturing springs that restored ride height, stability, and control to trucks and campers weighed down with heavy cargo. Rudy's philosophy was to build products that exceed a customer's expectations in both performance and durability, and his business practices of taking care of customers after a sale quickly built the company a positive reputation. After a 1963 Hot Rod Magazine feature showed how effectively Hellwig adjustable stabilizers eliminated handling problems inherent in stock Chevrolet Corvair suspensions, word of the company's products spread. In the late 1960s, Hellwig expanded and relocated to its current headquarters in Visalia, California. Hellwig remains a family-owned business with a 4th generation actively and passionately involved today and looks to the future with the excitement of developing and refining products for an ever-changing market.

    • This sway bar is custom fit for the RAM ProMaster. This includes the 1500, 2500, and 3500 versions.

    • High-quality hot-formed and heat-treated 4140 chrome moly spring steel

    • Greatly improves cornering traction for safer driving and turning capabilities

    • Sway Bars distributes weight evenly to all four wheels

    • Custom-fit for the RAM ProMaster 3500

    • Fast, Easy "Bolt-On" installation

    • Lifetime warranty on all Hellwig Sway Bars

    • Adjustable-rate sway bar

    • Polyurethane bushings

    • Includes all required mounting hardware

    • Reduces body roll and sway for better vehicle control


Tech Specs

Bar Diameter: 1 1/8"
Average Install Time: 1 to 2 hours
Drilling Required: NO
Location: (front or rear axle) REAR AXLE