2007-2013 Sprinter Van T-One Vehicle Wiring Harness With 4-Pole Flat Trailer Connector

Etrailer
SKU:
ETC-6007n-4pole-TowHarness-bw056811
$72.95
(No reviews yet)
Width:
6.00 (in)
Height:
6.00 (in)
Depth:
9.00 (in)
Current Stock:
Adding to cart… The item has been added
About Tekonsha®: The Leader in Electronic Brake Controllers
Looking into a mirror can remind us of who we really are, and in the case of Tekonsha, that mirror reflected a company that would soon become a trusted leader in trailer braking. In 1964 when it first began, the Tekonsha Engineering Company proudly created and manufactured RV steps and mirrors, but just a few shorts years later, that company climbed the stairs and became the powerhouse it was destined to be: a leading manufacturer of trailer brake controllers. Since its inception, Tekonsha has been at the forefront of innovation and design, from the first steps and mirrors to come off its assembly lines to pioneering the manufacture of electronic trailer brake controllers in the 1970s. Since then, Tekonsha has been a trusted leader in towing safety, with products ranging from brake controllers to electrical wiring and trailer brakes. Top Tekonsha Brake Controllers Brake controllers are the heart of the Tekonsha product line with a vast offering of proportional and timed units to fit any tower’s needs. one of the special products is 2007-2013 Sprinter Van T-One Vehicle Wiring Harness With 4-Pole Flat Trailer Connector

Sprinter Van T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector This product is compatible with Sprinter Vans made from 2007-2013. This includes both the 2500 and the 3500 versions.
Tekonsha Custom Fit Vehicle Wiring  


    • Custom Fit

    • Trailer Hitch Wiring

    • 4 Flat

    • Powered Converter

    • Tekonsha

 

 


Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on the wiring system.    

Features:
 

    • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
        • Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)

 

    • Connects quickly and easily
        • Locate connection points in the rear cargo area

        • Plugin T-connector

        • Run hot lead to the car battery

 

    • Includes ModuLite power converter to ensure that your vehicle's wiring matches that of your trailer
        • The powered module connects to the battery to avoid overloading the vehicle's electrical system

 

    • Constructed of 16-gauge bonded wire

 

    • Comes with a dust cap for a 4-way flat connector

       

Specs:
 

    • Maximum amperage:
        • Stop/turn lights: 5 amps per circuit

        • Taillights: 7.5 amps per circuit

 

    • 1-Year limited warranty

   

Installation


This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your rear cargo area, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior paneling to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.

 


Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area.

 


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.

 

 

ModuLite Powered Tail Light Converter


A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's taillights. Note: This will not affect how the tail lights on your vehicle operate.

 


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.

 

 

118650 Tekonsha T-1 T-Connector - 4 Wire - Modu-Lite Converter Included

  This Product Fits The Following Vehicles    


        • 2007 - 2009 Dodge Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper

        • 2007 - 2013 Freightliner Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper

        • 2007 - 2009 Dodge Sprinter 2500 Van - 170 inch Wheelbase - with standard bumper

        • 2007 - 2009 Dodge Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper

        • 2010 - 2013 Mercedes-Benz Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper

        • 2010 - 2013 Mercedes-Benz Sprinter 2500 Van - 144 inch Wheelbase - with standard bumper

        • 2010 - 2013 Mercedes-Benz Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper

        • 2010 - 2013 Mercedes-Benz Sprinter 3500 Van - 170 inch Wheelbase - with standard bumper

        • 2007 - 2009 Freightliner Sprinter without factory trailer connector

        • 2007 - 2013 Freightliner Sprinter 3500 Van - 144 inch Wheelbase - with standard bumper

        • 2007 - 2009 Dodge Sprinter 3500 Van - 170 inch Wheelbase - with standard bumper

        • 2007 - 2009 Dodge Sprinter without factory trailer connector

        • 2010 - 2011 Mercedes-Benz Sprinter 3500 Cab and Chassis - 170 inch Wheelbase

        • 2007 - 2013 Freightliner Sprinter 3500 Van - 144 inch Wheelbase - with factory step bumper

        • 2010 - 2013 Mercedes-Benz Sprinter 3500 Van - 144 inch Wheelbase - with factory step bumper

        • 2010 - 2013 Mercedes-Benz Sprinter 3500 Van - 144 inch Wheelbase - with standard bumper

        • 2007 - 2013 Freightliner Sprinter 2500 Van - 144 inch Wheelbase - with standard bumper

        • 2007 - 2013 Freightliner Sprinter 2500 Van - 170 inch Wheelbase - with standard bumper

        • 2010 - 2013 Mercedes-Benz Sprinter 2500 Van - 170 inch Wheelbase - with standard bumper

        • 2007 - 2009 Dodge Sprinter 3500 Cab and Chassis - 170 inch Wheelbase

        • 2007 - 2009 Dodge Sprinter 3500 Van - 144 inch Wheelbase - with factory step bumper

        • 2007 - 2013 Freightliner Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper

        • 2010 - 2013 Mercedes-Benz Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper

        • 2007 - 2013 Freightliner Sprinter 3500 Van - 170 inch Wheelbase - with standard bumper

        • 2010 - 2013 Freightliner Sprinter without factory tow package

        • 2010 - 2013 Mercedes-Benz Sprinter without factory tow package

        • 2007 - 2013 Freightliner Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper

        • 2007 - 2009 Dodge Sprinter 2500 Van - 144 inch Wheelbase - with standard bumper

        • 2007 - 2009 Dodge Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper

        • 2007 - 2011 Freightliner Sprinter 3500 Cab and Chassis - 170 inch Wheelbase

   


    • 2007 - 2009 Dodge Sprinter 3500 Van - 144 inch Wheelbase - with standard bumper
cwg_total_subscribers:
1