Turn a manual Fiamma F45S into a power awning. These 12V retrofit kits mount on the end of the F45S you already have, and the awning still opens by hand in override mode, so a dead battery never leaves it stuck out. Pick the kit color to match your case: Polar White, Titanium or Black. Buying a new F45S from us? Add the motor on the awning page and Fiamma installs it at the factory.
Compact or Advanced?
- Compact (08319): a small, simple motor run from a wall-mounted Extend/Retract switch. It comes with the motor, covers, end cap, wall switch, override crank and the screws and rivets to mount it.
- Advanced (08455): adds control from the Fiamma app on iOS or Android, including dimming the awning LED lights, and still includes a wall switch.
Before You Install
- The motor adds about 13 cm (5 in.) to the awning's overall length. Check clearance at the end of your roof rack or ladder.
- 12V only, up to 144 W. Feed it from a line with a 12 A fuse; the motor carries its own 5 A fuse.
- Fiamma recommends an ignition relay (not included) so the awning can't open while you drive, and installation by someone comfortable with 12V wiring. You'll need a drill and a screwdriver.
- The Compact kit weighs about 2 kg (4.4 lb).
Pair it with a Fiamma LED rafter or case light. Running an F80S? See the Fiamma F80S motor kit.
Shop all Sprinter Van Awnings →
