Microwave Cabinet for Sprinter, Transit, and Promaster Vans
Upgrade your van conversion with the Microwave Cabinet – a sleek and functional overhead storage system designed to house a 700W microwave for convenient on-the-road cooking. Built for Mercedes Sprinter, Ford Transit, and Ram Promaster vans, this overhead cabinet combines rugged durability with professional builder aesthetics, giving your van a polished and practical finish.
Built for Van Life Convenience
This cabinet is handcrafted from the same paint-grade plywood used in custom home kitchens, making it lightweight, durable, and built to last. With a precisely cut back curve to match your van’s interior, it integrates seamlessly into your build while offering reliable performance on the road.
Key Features
-
Microwave Included: Cabinet comes with a 700W microwave (0.7 cu. ft.), low-draw and road-friendly.
-
Preassembled & Ready to Install: Ships fully built for quick installation.
-
Secure Closure: Equipped with black compression latches to keep belongings safe in transit.
-
Modern Squared Design: Features a clean edge profile with inset doors for a professional look.
-
Flexible Mounting: Attaches to walls, ceiling panels, headliners, or directly to the frame (rivet nuts recommended).
-
Vehicle-Specific Fit: Backing is precision-cut to match Sprinter, Transit, and Promaster ceiling and wall curvature.
-
Strong & Durable: Rated to hold up to 100 lbs of storage per cabinet.
-
Elegant Finishes: Available in Prefinished Maple, Prefinished Amber Bamboo, or Stealth (Black Hex-Ply) with satin urethane seal.
-
Lighting Ready: Cabinets are unwired, allowing you to integrate into your own central power system.
Specifications
-
Length: 40"
-
Depth: 15"
-
Height: 15"
-
Microwave Volume: 0.7 cu. ft.
-
Microwave Power Consumption: 700W @ 110VAC
-
Weight Rating: 100 lbs per cabinet section
Installation
-
Difficulty: Medium | 2 people
-
Time Required: ~1 hour
-
Tools Needed: Power drill, rivet nut tool, screwdriver, drill bits
-
Mounting Method: Hangs with 2" fasteners + washers into factory holes with rivet nuts. Microwave slides into an internal mounting plate and is secured with a hook-and-loop strap through the partition.
Additional Notes
-
Adventure Wagon Compatible: Can be made compatible upon request (add note to order).
-
Wood Variation: Natural lumber patterns vary in shade, tint, and grain. Small gaps (~0.075") may occur at ends/joints—can be filled, painted, or left natural.
-
Painting Instructions: Sand lightly (120–180 grit) → Apply 2–3 coats primer → Paint → Finish with protective sealant.
-
Staining Instructions: Sand with grain → Apply stain carefully with rag/sponge/spray → Avoid overlap to prevent dark patches → Finish with protective coat.
Order Changes & Refund Policy
Once an order is placed, all changes (appliances, width, add-ons, material) must be finalized immediately. Any changes made after this time will incur a minimum 30% restocking fee. This ensures order accuracy and reduces inconsistencies. Contact us immediately before production/shipping if you need to make updates.
Custom orders cannot be refunded once in production. Refunds cannot be issued after this point.
✅ The Microwave Cabinet is the perfect upgrade for Sprinter, Transit, and Promaster conversions, offering safe storage, cooking convenience, and a professional builder finish. Whether you’re a DIY van lifer or a professional builder, this cabinet delivers the functionality and style you need on the road.
Available in these skus:
- SGS-UPP-MIC-L-SPR
- SGS-UPP-MIC-L-TRN
- SGS-UPP-MIC-L-PST
- SGS-UPP-MIC-R-SPR
- SGS-UPP-MIC-R-TRN
- SGS-UPP-MIC-R-PST
- SGS-UPP-STH-L-SPR
- SGS-UPP-STH-L-TRN
- SGS-UPP-STH-L-PST
- SGS-UPP-STH-R-SPR
- SGS-UPP-STH-R-TRN
- SGS-UPP-STH-R-PST
- SGS-UPP-SMB-L-SPR
- SGS-UPP-SMB-L-TRN
- SGS-UPP-SMB-L-PST
- SGS-UPP-SMB-R-SPR
- SGS-UPP-SMB-R-TRN
- SGS-UPP-SMB-R-PST