RotopaX Water Container | 1, 1.75 or 2 Gallon, 4 Colors

Drinking water, a rinse for sandy feet or muddy gear, a top-off for the galley tank: a few gallons carried outside the van frees up room inside it. As a camping water container or for overland water storage, RotopaX water packs share the flat, mountable shape of their fuel packs, so they clamp onto a ladder, rack or tire carrier and stay put on washboard roads.

Sizes and Colors

• RotopaX 1 Gallon Water: 13.5" x 9.5" x 3"; white, black, OD green or tan
• RotopaX 1.75 Gallon Water: 14.5" x 13" x 3.5"; white, black, OD green or tan
• RotopaX 2 Gallon Water (Gen 1): 18" x 14" x 3", with an interlocking bottom that pairs with another Gen 1 2 gallon pack; white, OD green or tan
• RotopaX 2 Gallon Water, Gen 2: 18" x 14" x 3", the newer flat-bottom design with a stronger shell and a higher-flow spout; white, OD green or tan

Dimensions are height x width x depth.

Features

• BPA-free materials.
• Pour spout included. RotopaX sells a spigot kit separately if you'd rather have a tap.
• 10-year leak-free warranty from RotopaX.
• Made in the USA.

Mounting

Each pack has a hole through its center that slides over a RotopaX pack mount; the mount's handle threads down and clamps the pack tight against the surface. A pack on its own doesn't include a mount, so pick a Standard, Deluxe or Locking mount in the Mount option above to get both in one order, or add one later from our RotopaX mounts listing. Any RotopaX mount fits any RotopaX pack.

Standard, Deluxe or Locking?

• Standard Pack Mount: one T-handle that spins down to clamp the pack. The simplest, lowest-cost choice, and plenty for a pack that rides on pavement.
• Deluxe (DLX) Pack Mount: two arms that tighten separately, so the pack stays put on washboard and trail. RotopaX's best seller, and the one it recommends when you stack two packs.
• Locking (LOX) Pack Mount: the Deluxe two-arm design plus a lock cylinder and two keys, so the pack and what's in it stay on the van when you're away from it. Single packs only: it doesn't work with an extension.

All three bolt down on the same 4" disc base and fit every RotopaX pack.

Fits Any Van

RotopaX isn't vehicle specific. A pack goes anywhere you can bolt a mount to a flat, solid surface: a rear ladder, roof rack, spare tire carrier, rear-door storage panel or bumper. On a Sprinter, Transit or ProMaster the ladder or roof rack is the usual home, and Aluminess owners can use the BackPACK RotopaX mounting plate.