Two ways to light up the space under a Fiamma F45S: a telescoping LED rafter that clips in between the awning case and the lead bar, or an LED light bar that presses into the bottom rail of the case itself. Pick the case light in the color of your F45S case.
LED Rafter (98655-850)
- Telescoping anodized aluminum bar, 142 to 265 cm (about 56 to 104 in.), with 36 LEDs and a built-in on/off switch.
- Ships with hooks that carry the power connection for the F45S: click the rafter into place and it lights.
- Comes with 5 m (16 ft) of cable and a 12V lighter plug, or hard-wire it to the van.
- You can run more than one rafter on the same awning.
LED Awning Case and 50 cm Extension
- COB LED bars that press into the lower rail of the F45S case, so the light sits flush with the awning and can stay installed while you drive.
- The case kit is 2.5 m of light for a 3.0 m (300) awning: one wired bar plus four add-on bars, about 510 lumens each.
- Each 50 cm extension adds one bar. Add one for a 350 awning and two for a 400.
- Black or white to match the case. Fiamma doesn't make a titanium version.
Everything runs on 12V. Want the awning to open at the push of a button too? See the Fiamma F45S motor kit. Running an F80S? See the Fiamma F80S LED awning lights.
Shop all Sprinter Van Awnings →
